Menu
SHOPPING CART: (0) ITEMS
Digital Video Transmitter for Long Range Applications

Digital Video Transmitter for Long Range Applications

On sale$194.00
Out of Stock
Part Number:PD2420

Our higher power PD2420 Digital Wireless Transmitter and Receiver can transmit video signals up to 3000 ft. with unobstructed view between transmitter and receiver antennas. The existing antennas are also removable so you can attach higher gain directional antennas for extending the wireless range.

Our PD2420 Digital Wireless Transmitter uses spread spectrum frequency hopping innovation along with digital paring for privacy and no interference signal transmission. Video images can be sent from security cameras, televisions, camcorders or other equipment with a standard composite video signal. The images are digitally sent in 720 x 480 resolution for a very clear and stable picture.

12 volt DC power operation make it easy to power both the camera and transmitter for a single power source such as the included power supply, battery pack or even solar power if available. An IR extender is also included for sending control signals from a remote control.

  • Send video and stereo audio signal wirelessly to receiver connected to DVR, TV or monitor
  • Digital encrypted signals
  • Works alongside other 2.4 GHz equipment without interference due to the frequency hopping auto channel selection.

Input/Output: RCA female video and audio connectors (if you need to adapt to a different format please see our connectors and adapters .

Antenna inputs: Transmitter and receiver have reverse polarity SMA female connectors so any replacement antenna or antenna cable must have a reverse polarity SMA male connector.

Transmitter Specifications:
Operating Frequency Band: 2.403GHz~2.478GHz
Maximum Transmit Power: 200mW
Modulation: 16QAM/QPSK/BPSK
Video Input Level: 1V p-p @ 75 ohm
Audio Input Level: 1V p-p @ 600 ohm (STEREO)
Antenna: Omni-directional
IR remote: IR output 940nm with ON/OFF keying
Power consumption: 2.7W
Power supply: 12V/1A
Dimensions: 3-1/2" (W) x 3-1/8" (D) x 15/16" (H) / 4-1/2" wide including flange
Weigh:t: 82g, 5oz.

Receiver Specifications:
Operating Frequency Band: 2.403GHz~2.478GHz
Receiver Sensitivity: -85dBm min.
Video Output Level: 1±0.2V p-p @ 75 ohm
Audio Output Level: 1±0.2V p-p @ 600 ohm (STEREO)
Antenna: Omni-directional
IR remote: IR Input 940nm with ON/OFF keying
Power consumption: 2.7W
Power supply: 12V/1A
Dimension: 3-1/2" (W) x 3-1/8" (D) x 15/16" (H) / 4-1/2" wide including flange
Weight: 82g, 5oz.

System:
Transmission channels: 26 channels auto selection Video bit rate up to 12Mbps
Random ID code: up to 4 million sets
Video resolution: 720 x 480 @ 30 fps (NTSC)

Purchase Includes:

  • 200mW Digital Transmitter
  • Digital Receiver
  • Two Omni-directional antennas
  • Two 6 ft. RCA A/V patch cables
  • Two IR Remote Extender cables for transmitter and receiver
  • One 12VDC power supply for Receiver
  • One 12VDC power supply for Transmitter
  • One Year Warranty
5 Stars
Excellent long distance video transmitter / receiver
Set-up was intuitive and easy, and I had wireless streaming video for my security camera to my DRV in about 10 minutes after opening the box and without even needing to read the instructions. The resolution of the video is excellent. The frequency used by the transmitter / receiver pair is very strong with good signal strength -- it can pass signal through walls and between floors, and a heavily wooded area for at least a 1000 feet. I did not experience any interference for other wireless devices in my house. I would recommend this product as a perfect solution to a long distance video transmission.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Ohio. on 11/1/2013
5/5
5 Stars
Tech
This product works, I used this product to build a target camera system, with antennas provided I was able to get 860 yards clear line of sight
Did you find this helpful? 
Reviewed by:  from KS. on 9/5/2015
5/5

Related Items

Recently Viewed Items